Balaji Techno Traders

Applications: Gears, Bearings | Bolts, nuts, flanges, threaded connections (especially stainless steel)

Kluber oil G1 320 | OKS 476

High scuffing protection: resists gear surface damage under extreme peak loads, vibration, or poor running-in.
Excellent wear protection: extends gear and rolling bearing life; lowers maintenance/repair costs.
High micropitting resistance: FVA 54/7, GFT ≥ 10 for heavy-duty protection.
Strong shear stability: maintains effective lubricant film under heavy shear forces.
Excellent aging & oxidation resistance: longer service life vs. standard mineral gear oils; enables longer intervals.
Low foaming & anti-corrosion: clean, uninterrupted gear operation; reduced foam issues.
Good elastomer compatibility: suitable with NBR, FKM seals to help prevent leakage and contamination.
OEM approvals: Siemens-Flender, SEW-Eurodrive, Lenze, Stöber, Bonfiglioli, and others.
NSF H1 registered: suitable for incidental food contact.
Wear reduction: minimizes friction and extends component life.
Outstanding resistance to oxidation/ageing; hot/cold water, water vapor; alkaline/acidic cleaners.
Wide temperature range: –30 °C (≤1,400 hPa) to +110 °C.
High load capacity: four-ball welding load 2,200 N.
NLGI grade 2 consistency.

Applications: Bolts, nuts, flanges, threaded connections (especially stainless steel)

OKS 476

NSF H1 registered: incidental food contact approved.
Reduces wear; extends operational life of fasteners and assemblies.
Resistant to oxidation/ageing; hot/cold water, steam; alkaline/acidic disinfectants.
Temperature range: –30 °C (≤1,400 hPa) to +110 °C.
Four-ball welding load: 2,200 N (high load-carrying).
NLGI grade 2.

Applications: Bolts, nuts, flanges, threaded connections (especially stainless steel)

OKS 476

NSF H1 registered for incidental food contact.
Helps reduce wear and friction on threaded joints.
Resistant to oxidation/ageing; hot/cold water and water vapor; alkaline/acidic cleaners.
Effective from –30 °C (≤1,400 hPa) to +110 °C.
Four-ball welding load: 2,200 N.
NLGI grade 2.

Applications: Threaded connections at high temperature/corrosive service; pipe fittings and flange joints in superheated steam lines

OKS 240 Anti-Seize Compound Paste

Metal-free high-performance anti-seize paste.
Facilitates non-destructive dismantling after prolonged high-temperature exposure.
Balanced screw pretension vs tightening torque for optimal assembly.
Electrically conductive for applications requiring conductivity through fasteners.
Available as spray (OKS 241) for easy application.
Broad-spectrum protection across extreme temperatures; oxidation/corrosion protection.

Applications: High-performance synthetic gear & circulating oil (food industry)

Kluber Summit UnifAr FG 220

Food-safe: NSF registered; USDA H-1 compliant; Kosher & Halal approved; produced in ISO 21469-certified facility (qalu).
Outstanding wear and EP protection: meets highest stages of FZG gear test; extends equipment life.
High oxidation resistance: reduced oil degradation; maintains effectiveness longer.
Synthetic-friendly performance: white mineral oil base, synthetic-like longevity.
Available in multiple viscosities: FG-150, FG-220, FG-320, etc.

Applications: Gear box | Bearings, gears, drafting rollers, clutch parts, cams, sliding parts

Eni RGB 220 | Microlube GLY 92

High load capacity: prevents gear wear/scoring under severe service.
Thermal stability & oxidation resistance: consistent performance at elevated temperatures (~100 °C).
Smooth gear operation: reduced friction; seamless movement.
Excellent demulsibility: rapid water separation for reliable lube in moist environments.
Non-corrosive formulation: compatible with steel, cast iron, copper, bronze, seals.
Extended service life: longer oil change intervals; fewer deposits; less downtime.
Excellent low-temperature performance down to –45 °C.
Strong corrosion protection (low EMCOR ratings over extended tests).
High water resistance (DIN 51807-1).
Wide operating range: –45 °C to +150 °C.

Applications: Gear box oil

Klübersynth GEM 4 220 N (20000 hrs)

High scuffing protection under extreme stress, vibration, or shock.
Excellent wear resistance: prolongs gear and bearing life; supports reaching calculated service life.
Superior micropitting resistance: GFT ≥ 10 (FVA 54/7).
Outstanding oxidation & ageing stability: much longer service life than mineral oils; extended intervals.
Broad temperature range with stable viscosity and strong lubricant film.
Low foaming and anti-corrosion for clean, stable operation.
Energy efficiency: lower oil/component temperatures (e.g., ~85 °C → ~80 °C vs mineral oil).
Elastomer compatibility (e.g., NBR/FKM; Freudenberg types) and major OEM approvals (Siemens-Flender, SEW-Eurodrive, Lenze, Bonfiglioli, etc.).

Applications: Eni engine oil 15W40 (transmission/engine/gear lubrication context)

Eni Rotra AIF

Superior extreme-pressure protection: reliable film under heavy dynamic/shock loads and high sliding speeds.
Outstanding anti-wear: reduces metal wear/abrasion; extends gear-tooth and bearing life.
Excellent oxidation stability: resists high-temperature degradation; supports extended service intervals.
Effective rust prevention: protects even with moisture present; safeguards during operation/storage.
Anti-foam capabilities: minimizes air entrainment for consistent load-bearing films and smooth operation.

MANGO INDUSTRY